Heating boilers with automatic fuel supply. Practical setup

Pellet boiler is a modular mini-boiler room with all the necessary set of digital, analog devices and elements. To connect, you will need to connect electricity and bring the connections of the heat exchanger to the hydraulic arrow of the heating system. Installation of a pellet boiler in autonomous heating systems is as simple as possible and is no different from the installation and piping of a solid fuel boiler.

When choosing pellet burner and additional equipment, the installation process is a little complicated, but it is not particularly difficult if you follow the instructions.

Things to consider when installing pellet boiler or boiler with burner?

The peculiarities of installing a pellet boiler or a boiler with a burner are that the system regulates the temperature of the coolant and critical parameters. Many pellet boilers have pumps at their base. But more often the masters install a pumping group. The piping of the boilers is carried out as usual. The features of the heating system with autonomous boilers with automatic fuel supply include the following. That there is no need to install a backup heat source. This greatly simplifies strapping and hydraulic matching.

Use different heating circuits to heat different sections of the room. For these purposes, pumping and collector assemblies can be used.

Does the system need a heat storage device?

Installation of a pellet boiler or a burner with a solid fuel boiler implies the selection and coordination of equipment. In conventional systems with a solid fuel boiler installed heat accumulatorsto keep excess heat. This provides significant savings and increases the time interval between fireboxes.

However, in a system with a heating boiler with automatic fuel supply and combustion control, the need for a heat accumulator is eliminated. The burner or pellet boiler is adjustable microcontroller... The control unit also ensures the coordinated operation of the system pump. If the heat accumulator is installed for the purpose of hot water treatment and heating, this is the correct solution.

To use or not to use the buffer tank with the pellet boiler?