We consider in detail the process of operating the burner: pellet boiler and burner - what is the difference

After installing the pellet module, the boiler with the burner becomes a full-fledged pellet mini-boiler room, which can heat private houses, offices, shops and public institutions. The use of such heating equipment is universal. But consider the installation and operation of the burner after installation. How is such a solution different from a pellet boiler?

Pellet burner burner strife?

The pellet burner is an external module that fundamentally distinguishes pellet boilers from solid fuel. The “right” pellet burner, if offered as a separate product for installation in a solid fuel boiler, takes over the functions of full-featured pellet boilers.

We are talking about the following mandatory set of functions:

• about the cleaning system;
• cooling if necessary;
• about microprogram control, which controls the process of burner operation and safety;
• fuel supply;
• about the presence of ash traps and control of flue gases.

Usually these functions are implemented by a modern pellet boilerbut this is not the case when installing the burner. Accordingly, all systems must be implemented using an external module.

All of the above functions are possessed by pellet burner FOCUS... It fully implements the modern capabilities of foreign pellet boilers:

• controls the combustion process;
• has a cleaning system;
• ensures operational safety.

The FOCUS pellet burner is built on the basis of the well-known Plug & Play principle and only requires a competent connection.

Installation and operation of the burner on the boiler

The fact is that the pellet burner is installed in the furnace door of the chamber and, of course, its dimensions and volume are taken into account during installation. Manufacturers usually ask the buyer to ship the door itself and customize the burner to suit individual size requirements.

Despite the modular principle of organizing a pellet boiler house on the example of the FOCUS brand, it is still desirable that it be installed by specialists. Subsequently, the burner operation process is fully automated.

During operation, heating equipment:

• transmits data on normal and abnormal modes over the network;
• assumes remote control and notification on "alarm";
• turns on and off independently when climatic indicators change and in the presence of fuel.

The owner of the boiler room only needs to regularly fill the pellet hopper. Power cleaned models should be cleaned by hand approximately once every 1-2 seasons. The cleaning period can be increased by using catalytic granules that dissolve the ash residue on the boiler walls. To reduce contamination, the manufacturer recommends using wood pellets.

What is included in the prefabricated mini-pellet boiler room

If you decide to buy pellet equipment, then choosing the innovative FOCUS pellet burner will be the best solution. To transfer a house to heating with pellets, you need to purchase:

• solid fuel boiler (can be installed earlier);
• pellet burner;
• pellet hopper.

If the pellet boiler house is of high power, then a complex system of screws is installed. With their help, a conveyor is organized, feeding pellets from a neighboring room or an underground bunker. After installing the conveyor, the operation of the boiler and burner becomes fully automatic and controlled by microclimatic parameters.

The cost of a pellet plant together with a solid fuel boiler, designed for multi-circuit heating, is about 60 thousand hryvnia. For this cost, the buyer receives from FOCUS the functionality typical for expensive models, and regional warranty service.