Pellet boiler Mono-pellet 60 kW FOCUS (5-65 kW)

Pellet boiler Mono-pellet 60 kW FOCUS with climate control for households 

Economical pellet boiler Mono-pellet 60 kW from TM "FOCUS" is designed for heating domestic and small commercial premises up to 600 m², and with good insulation - up to 650 m². The boiler operates in automatic mode, providing effective heat removal due to the torch pellet burner. It supports both clean wood pellets with low ash content (up to 1%), and agropellets with ash content over 10%, ensuring complete combustion of fuel and environmentally friendly operation.

The automatic self-cleaning grate and automatic ignition with flame control functions greatly simplify operation. The boiler automatically regulates operation depending on the temperature, reducing the need for manual control. The touch control panel with an intuitive interface, if controlled by the Mono-pellet boiler 60 kW, makes the setup process simple and understandable for users, minimizing effort, and the movable grate helps keep the burner clean without laborious cleaning of soot and carbon deposits.

This 60 kW Mono-pellet boiler provides reliable, economical operation using affordable pellets and allows you to efficiently heat complex heating systems.

Main advantages of a pellet boiler Mono-pellet 60 kW:

1. Touch control panel with intuitive interface: Simplifies setup and management, suitable for users with minimal experience.
2. Automatic cleaning of the pellet burner: The movable grate throws off ash, the optical sensor monitors the presence of flame, automatic pellet feed and temperature regulation ensure efficient use of fuel.
3. Efficient heat exchanger: Horizontal design with developed convective part promotes maximum heat transfer and fuel economy.
4. Hybrid heat exchanger: Combines plate and tube elements to absorb heat and filter ash.
5. Big ash pan: The increased volume allows for less frequent boiler cleaning, which is especially useful when using high-ash fuel.
6. Thermal stress protection system: Plate heat exchanger reduces flare point impact, preventing overheating and precipitating volatiles.
7. Ease of maintenance: Wide hatch and convenient access to the heat exchanger and ash chamber simplify maintenance.
8. High capacity ash pan: Suitable for industrial use with high ash pellets, without the problems typical of foreign models.
9. Flexibility of hot water supply (HWS) connection: Threaded connections allow easy connection of a heat exchanger or indirect heating boiler with the possibility of using a DHW temperature sensor.

Automatic pellet boiler Mono-pellet 60 kW offers a high level of convenience, efficiency and reliability for solving heating problems on various types of pellets.

Design features of the FOCUS boiler:

Design features of the pellet boiler Mono-pellet 60 kW FOCUS:

• Boiler material: Structural steel 09G2S ensures reliability and durability.
• Wall thickness: Heat exchange part (furnace and primary heat exchanger) – 6 mm, outer shell of the water jacket – 4 mm.
• Heat exchanger surface area: 7.3 m² (including fire tube heat exchanger) for high heat transfer efficiency.
• thermal insulation: 50 mm thick basalt mineral wool prevents heat loss.
• Boiler casing: Made of AISI 201 stainless steel, polished, resistant to corrosion and provides an aesthetic appearance.
• Sectional door: Single door for access to pellet burner and heat exchanger with adjustable hinges and locks for a tight fit.
• Flexibility of design: Possibility of changing the door opening side for ease of maintenance.
• Hybrid heat exchanger: Combines plate and fire tube heat exchangers, increasing heat transfer efficiency.
• Big ash pan: Designed for several days of continuous operation, which reduces the need for frequent maintenance.

These characteristics make the boiler reliable and easy to operate for long-term and stable operation.

The best solution on the home heating market based on pellet burner FOCUS

Built-in pellet burner TM "FOCUS" provides high versatility and efficiency of the pellet boiler Mono-pellet 60 kW. It is designed to operate on both pure wood pellets and agropellets with ash content up to 10%. Pellets from various materials can be used as fuel, including sunflower waste, corn, buckwheat, rice, furniture waste and straw.

The main advantages of the pellet burner built into the Mono-pellet 60 kW boiler:

• Automatic ignition using Japanese ceramic candles for contactless air ignition.
• Movable mono-grid, which stirs the burning fuel and removes high-ash residue into the ash pan, simplifying maintenance.
• Fuel feed auger for delivering pellets to the combustion chamber.
• Auger temperature sensor Prevents overheating by automatically shutting off the fuel supply in the event of an accident.
• Infrared flame sensor monitors the presence of flame and automates the regulation of the burner operation.
• Optimal proportions of primary and secondary air ensure efficient combustion.
• Drive from the Swiss company "Belimo" with anti-jamming protection for reliable movement of the grate plate.
• Air blow nozzle (for 100-150 kW models), increasing efficiency by burning gases.
• Stainless steel nozzle and grate to increase durability.

All burner models are equipped with a fuel supply line "break" system to ensure safe operation. The controller allows you to easily adjust the operation of the equipment, and the Mono-pellet boiler 60 kW is fully automatic, which makes it convenient to use.

Functions and equipment of the pellet boiler Mono-pellet 60 kW:

• Power adjustment: range from 5 to 65 kW, which makes the boiler universal for various rooms.
• Heat exchanger surface area: 7.3 m², ensuring high heat transfer efficiency.
• Security levels: 5 basic levels including automatic ignition, extinguishing and cleaning functions, making it easy to operate.
• Built-in ceramic lighter: reliable system startup.
• Low power consumption: 40 W excluding automatic ignition, which allows the boiler to be used with batteries or solar panels.
• PID control: provides precise control of the burner operation, useful for integration with smart home systems.
• Movable grate: facilitates mechanical cleaning of the burner.
• Pump control: for hot water supply and heating, providing flexibility in use.
• Support for thermostats and internet modules: for remote control.
• Automatic temperature control: depending on weather conditions.
• Compliance with the standard: GOST 32452-2013 (EN 15270:2007).
• Guarantee: 12 months, confirming the high quality and reliability of the equipment.

Contents of delivery:

• solid fuel pellet boiler Mono-pellet 60 kW in combination with a burner;
• screw conveyor 2 meters;
• corrugated PVC pipe - 1 m;
• pellet boiler controller;
• documentation.

---

Equipment for pellet boiler rooms

Devices and modules that increase the level of autonomy of the heating system, where the Mono-pellet boiler 60 kW is used:

• pellet hopper;
• room touch EcoSter regulator;
• additional temperature sensors.

Consult our specialists on the features of the deployment of heating circuits and connections.

---

Dimensions (edit)

Chimney outlet diameter

219 mm.

---

Requirements for the boiler room

When designing a boiler room where a 60 kW Mono-pellet boiler is used, it is necessary to adhere to the following requirements:

• MDNAOP 0.001.26-96;
• DBN B.2.5-XX: 20XX;
• SNiP 2.04.05-91 "Heating, ventilation and air conditioning";
• SNiP II-35-76 "Boiler plants".

---

Interesting to read

Pellet burner operation process in detail

Which solid fuel boiler to buy for production

How does the design of the pellet hopper affect efficiency?

Controller