Pellet monoblock boiler 50 kW FOCUS, power range (5-55 kW)

Automatic pellet monoblock boiler 50 kW FOCUS 

By purchasing a 50 kW pellet monoblock boiler, you eliminate the need for additional automation, mixers, settings and control. The service engineer will perform the connection in one cycle and put the entire heating system into operation, be it batteries, underfloor heating or air heating.

Pellet monoblock boiler 50 kW TM "FOCUS" is specially designed for the household segment and small business premises, small production facilities and workshops with an area of up to 500 m² (in insulated facilities, the maximum effective heated area can be increased to 550 m²), providing automatic operation. When developing and manufacturing the boiler, the main attention is paid to the efficiency of heat removal, which is achieved thanks to a torch pellet burner that operates not only on clean wood pellets, but also on ash (agro) pellets. 

The burner is equipped with a self-cleaning grate and automatic ignition with flame control by its glow. The automation literally "sees" the flame and maintains it independently. This makes the purchase economically feasible and ensures ease of operation of the equipment when using commercially available fuel pellets. The 50 kW FOCUS pellet monoblock boiler operates on high-ash pellets, without causing damage to the environment and the boiler structure.

---

Pellet monoblock boiler 50 kW: main advantages

• Built-in internet monitoring and boiler control system: Saves all information about boiler operation and temperatures, facilitating setup and operation. Helps in resolving issues when contacting the service department, reducing the number of false calls to the technician. Remote start and stop, temperature control, and if room panels are installed, room temperature control.
• Touch, intuitive control panel: Friendly settings interface that makes working with the boiler easier.
• Convenient cleaning of the pellet burner: A movable grate independently discharges ash, an optical sensor monitors the presence of flame, automatic supply of pellets and smooth temperature and power control, which allows you to control fuel consumption.
• Developed convective part of the heat exchanger: Combined with a highly efficient horizontal heat exchanger.
• Hybrid heat exchanger: Combination of plate and tubular heat exchangers for efficient heat removal and work as an ash filter. Allows you to effectively remove infrared radiation from the burner torch.
• Large ash pit: The largest possible size, especially for working on high-ash fuel.
• Section of the structure for relieving primary thermal stress: The plate heat exchanger eliminates the point impact of the torch on the heat exchanger structure and precipitates heavy particles of the volatile component of the torch.
• Convenient heat exchanger maintenance: Wide access hatch, horizontal cleaning and ash chamber in front of the chimney.
• High capacity ash pan: Designed to work with industrial boilers. When purchasing a complete set of FOCUS equipment, the boiler can operate freely on high-ash pellets without the typical problems for foreign boilers designed for certified pellets.
• Built-in hopper 240 liters (~130 kg pellets): Simplifies the placement and connection of the boiler in small rooms of private housing.
• No condensation in the boiler: Increases the efficiency of the boiler by 30% compared to the configuration without return protection and on a cold system (when the system return is below 20-30°C). There is no need to select mixing equipment and synchronize it with the boiler automation.
• Threaded pipes for connecting DHW: An optional DHW temperature sensor is required, to which a heat exchanger or indirect heating boiler can be connected.

The 50 kW pellet monoblock boiler is a single-circuit heating solution for organizing a boiler circuit servicing heating systems of any scale (if power is available).

---

Pellet monoblock boiler 50 kW: design features

• Boiler material: Structural steel 09G2S
  • Wall thickness of the heat exchange part (furnace and primary heat exchanger, shells) – 6 mm
  • The thickness of the outer shell of the boiler water jacket is 4 mm
• Surface area of the heat exchange part (surface + fire tube heat exchanger): 3.4 m²
• Thermal insulation: Basalt mineral wool 50 mm thick
• Boiler casing: Stainless steel AISI 201 polished
• Sectional door: Provides access to the pellet burner, heat exchanger and general inspection
  • Adjustable hinges and locks to fine-tune the door's tight fit
  • Possibility of changing the door opening side
• Hybrid heat exchanger: Combination of plate and fire tube
• Large ash pit: Designed for several days of continuous operation at average and above average power
• Built-in bunker: With a top hinged cover on pneumatic shock absorbers, a capacity of 70 kg of pellets for operation for at least a day at maximum power

---

Features of the complex based on pellet FOCUS burners

The built-in pellet burner TM “FOCUS”, included in the equipment set, operates both on pure wood pellets and on agropellets with an ash content of up to 10%. It is possible to use fuel pellets from sunflower waste, corn, buckwheat, rice, furniture waste and straw without restrictions.

The 50 kW pellet monoblock boiler is the optimal solution for households, small shops and remote sites.

Pellet monoblock boiler 50 kW: advantages of the built-in burner

• Automatic ignition: Japanese ceramic candles were installed for contactless air ignition of pellets
• Movable mono-grid: Stirs up burning fuel and pushes high-ash residue into the boiler ash pan
• Fuel feed screw: Supplies fuel to the combustion chamber of the burner
• Built-in burner screw temperature sensor: Ensures safety by cutting off the fuel supply when overheated and transmitting an emergency signal
• Built-in infrared flame sensor: Captures and controls flame emission levels for safety and automation
• Primary and secondary air: Optimally selected proportions for proper fuel combustion
• Highly reliable drive from the Swiss company Belimo: With anti-jam protection, moves the grate plate
• Combustion chamber nozzle with air purging (for 100-150 kW models): Cools the nozzle and heats the secondary air, increasing efficiency due to afterburning of gases at the outlet
• Nozzle and grate: Made of stainless alloy

All models of flare burners are equipped with a "break" in the fuel supply line, ensuring the safety of equipment operation. The operation of the equipment is easily adjusted using the controller. This makes the 50 kW pellet monoblock boiler suitable for deploying climate control systems.

---

Functions and equipment

Functionality of the pellet monoblock boiler 50 kW (5-50 kW):

• power adjustment within 5 kW – 50 kW;
• heat exchanger surface area 3.4m²
• 5 basic security levels;
• automatic operation: ignition, extinguishing, cleaning;
• ceramic lighter;
• low power consumption (excluding auto ignition - 40W) - can be powered by a battery and a solar panel;
• PID-regulation (the possibility of precise control of the burner using an analog control signal, including within the framework of "smart home" technology);
• movable grate for mechanical cleaning of the burner;
• pump control (hot water treatment and heating);
• work with room thermostat and internet module
• work with weather regulation.
• built-in Internet connection module with connected access to the manufacturer's server (statistics and access to settings are stored).

Pellet monoblock boiler 50 kW complies with GOST32452-2013 (EN 15270:2007). A 12-month warranty is provided.

---

Contents of delivery:

• Solid fuel pellet monoblock boiler 50 kW FOCUS in combination with a built-in burner;
• Built-in 4-way mixing unit with a temperature sensor for the heating system;
• Weather sensor;
• Temperature sensor smoke gases;
• Hot water temperature sensor;
• Internet module EcoNet
• Built-in screw conveyor;
• Corrugated PVC pipe - 1 m;
• pellet boiler controller;
• Documentation.

---

Equipment for pellet boiler rooms

Devices and modules that increase the level of autonomy of the heating system:

• room touch EcoSter regulator;
• additional temperature sensors.

Consult our specialists on the specifics of deploying heating circuits and connections when purchasing a 50 kW pellet monoblock boiler.

---

Chimney outlet diameter

159 mm.

---

Requirements for the boiler room

When designing, you must adhere to the requirements:

• MDNAOP 0.001.26-96;
• DBN B.2.5-XX: 20XX;
• SNiP 2.04.05-91 "Heating, ventilation and air conditioning";
• SNiP II-35-76 "Boiler plants".

---

Interesting to read

Pellet burner operation process in detail

Which solid fuel boiler to buy for production

How does the design of the pellet hopper affect efficiency?

Controller