ecoFLOOR — FireBox

Wired room thermostat eSTER_x40

admin — Thu, 07 Dec 2023 12:11:36 +0000

Wired room thermostat eSTER_x40: a simple solution for comfortable temperature regulation

Wired room thermostat eSTER_x40 — is a modern device designed to control heating systems and maintain a comfortable temperature in the room. It is part of the boiler or heating equipment control system and allows you to effectively regulate the temperature depending on the conditions and preferences of the user.

Main features and capabilities:

Precise temperature control:
- Wired room thermostat eSTER_x40 provides the user with the ability to set the desired room temperature with an accuracy of 0.1°C. Thanks to the built-in temperature sensor and sensitive control algorithm, the device maintains a stable temperature regime, preventing overheating or cooling of the room.
Wired connection:
- Wired room thermostat eSTER_x40 connects to the boiler or heating system using wires, which ensures reliable communication and stable operation without interference or signal loss, which can sometimes occur in wireless models.
Intuitive control:
- Wired room thermostat eSTER_x40 Equipped with a simple interface with convenient buttons or a touch screen (depending on the model), which allows you to easily adjust the temperature and operating time of the heating system.
- The display shows up-to-date information about the temperature and the current operating mode of the system.
Programmable modes:
- Wired room thermostat eSTER_x40 supports the ability to program operating modes for different days of the week. This allows you to set up different temperature profiles for weekdays and weekends, taking into account the time when no one is in the house, or the time of night-time temperature reduction to save energy.
- It is possible to create an individual work schedule for each day of the week, which helps to optimize the use of heating resources.
Energy efficiency:
- Using the eSTER_x40 thermostat allows you to significantly reduce energy consumption due to precise temperature control and the ability to create heating system operation schedules. This is especially relevant for houses and apartments with independent heating, as well as for commercial properties.
Compatibility:
- The thermostat is compatible with most modern boilers and heating systems that support control via a wired connection. It is easily integrated into the heating control system in both residential and commercial or industrial facilities.
Durability and reliability:
- The device body is made of high-quality materials, which ensures its long service life. Simple design and wired connection guarantee reliable operation without the need for regular maintenance.

Advantages of the eSTER_x40 thermostat:

Precise temperature control: Minimizes temperature fluctuations, ensuring constant comfort.
Programmable modes: Possibility of setting up a schedule for automatic heating control.
Ease of use: The user-friendly interface and clear display make operation easy and intuitive.
Reliability: Wired connection ensures stable communication with the boiler or heating system.

Wired room thermostat eSTER_x40: functions

Wired room thermostat eSTER_x40 — is a practical and efficient solution for room temperature control. It provides both convenience and energy savings, and its accuracy and reliability make it an ideal choice for a wide range of heating systems.

provides full customization of the regulator menu from any room,
maintains the set temperature in the room,
downloading data from the regulator, it informs about the fuel level in the fuel tank, alarm conditions and boiler prompts, burner operation and the need to clean it, as well as the value of the external temperature,
switches the boiler on and off and ensures constant time synchronization with the regulator.

XSMART System:

adaptive control of the set temperature of the heating circuits and boiler,
access to operating parameters and schedules from the user and service menu,
selection of control modes and full setting of controller parameters,
permanent capacitive buttons,
battery saving mode, low battery and radio signal strength indicator,
parental lock,
easy pairing with devices.

Wired room thermostat eSTER_x40 is a convenient and functional modern module that reflects the concept of a “smart home”.

Equipment that enhances comfort

The EcoNet Internet Module is purchased with the selected controller for service pellet burners... Recommended for installation:

additional temperature sensors;
room sensor EcoSter (thermostat).

This digital equipment kit complements wired room thermostat eSTER_x40 increases the convenience of boiler control, the level of comfort in the heated room and helps to further reduce heating costs due to precise adjustment of heating modes depending on the time of day and day of the week.

Internet service

Remote control of on-line operation of PLUM devices from a computer via the website www.econet24.com.
Possibility to control all parameters of heating circuits, ventilation and solar systems, heat pumps and boilers.
Visual inspection of the operating status of the selected device and registration of the main parameters of its operation.
Transparent visualization of the device operation in the form of graphs and recording of alarms and data history with the ability to send notifications to an e-mail.

Mobile app

Mobile online control of PLUM devices via tablet, smartphone, using ecoNET.apk, ecoNET.app applications, including the eSTER_x40 wired room thermostat.
viewing and changing the operating parameters of all devices, and hence the heating or ventilation circuits, as well as changing modes and operating schedules.

Room thermostat touch wired xTHERM 60p white

admin — Tue, 13 Jun 2023 18:15:59 +0000

Functions

The room thermostat maintains the set temperature in the room and informs about controller alarms.

Controller settings can be controlled from any room.

One system solution

The xTHERM series thermostats work as part of a single system together with the ecoMULTI installation controller and xFLOOR underfloor heating controller.

Remote control and maintenance

With the BT module, you can remotely control the desired temperature in the premises of the building.

Installation methods

Overhead, wired. Provide for laying the conductors away from the power conductors of electrical appliances. Do not install near windows and doors, do not install near radiators, to avoid the sensor’s response to drafts, convector heat flows and incorrect measurement of room temperature. The installation height is 1.5 meters from the floor, at least 20 centimeters from the corners of the room, avoid installation along the draft between the door and the window.

Room thermostat touch wired xTHERM 60p black

admin — Tue, 13 Jun 2023 17:57:03 +0000

Functions

The room thermostat maintains the set temperature in the room and informs about controller alarms.

Controller settings can be controlled from any room.

One system solution

The xTHERM series thermostats work as part of a single system together with the ecoMULTI installation controller and xFLOOR underfloor heating controller.

Remote control and maintenance

With the BT module, you can remotely control the desired temperature in the premises of the building.

Installation methods

Room temperature sensor xTHERM 30p black (wired)

admin — Tue, 13 Jun 2023 17:11:59 +0000

Temperature sensor xTHERM 30p black (wired) for microclimate control

The xTHERM 30p black room temperature sensor is designed for high-precision measurement of indoor air temperature and is characterized by resistance to interference, reliability and a long service life. It uses an analog measurement method, changing the internal resistance depending on the temperature, which allows for stable and accurate readings in real time.

Room temperature sensor xTHERM 30p black: main characteristics:

Principle of operation:
- The sensor's operation is based on an analog measurement method, where a change in temperature causes a change in the sensor's internal resistance. This allows the sensor to quickly and accurately respond to any temperature fluctuations in the room.
Installation methods:
- Surface mounting: the xTHERM 30p black temperature sensor (wired) is mounted on the wall in the monitored room, making it easy to install and maintain.
- Wired connection: the xTHERM 30p black temperature sensor is connected to the control system via wires, which minimizes the likelihood of failures and interference.
Placement Recommendations:
- Installation height: the recommended installation height is 1.5 meters from the floor level, which corresponds to the average height of the room space and avoids temperature gradients.
- Distance from corners and doors: should be installed at least 20 cm from corners to avoid distortion of readings due to heat flows.
- Avoid direct exposure to heat sources: It is not recommended to install the xTHERM 30p black temperature sensor near radiators, convectors and in places with strong drafts, such as areas between a window and a door. This is important for correct temperature display without distortions caused by external factors.
Operating temperature range:
- The xTHERM 30p black temperature sensor operates in a temperature range from 0 to +55 °C, which allows it to be used in conditions typical for residential and office premises.
Electrical interference immunity:
- During installation, it is recommended to lay the sensor conductors away from power cables to eliminate the influence of electromagnetic interference on the accuracy of readings. This is especially important for installation in areas with a high concentration of electrical equipment.

Compatibility and application:

Compatibility with controllers:
- Temperature sensor xTHERM 30p black can be used with controllers of the series ecoFLOOR and ecoMULTI 360, which support analog sensors for monitoring and controlling room temperatures, as well as for regulating temperatures in heating and cooling systems.
Application areas:
- The xTHERM 30p black room temperature sensor is ideal for use in climate control systems, smart home systems, office premises, and industrial facilities where high temperature control accuracy is required.
- Recommended for installation in rooms with sensitive microclimate, such as greenhouses, hothouses, production facilities with the required temperature conditions.
Advantages:
- Accuracy and reliability: the sensor guarantees high accuracy of readings, minimizing errors by eliminating the influence of external factors.
- Easy to install and maintain: Surface-mounted installation method and wired connection make it easy to install the sensor indoors.
- Safety and durability: the device is made of high-quality materials, which ensures a long service life and resistance to mechanical impacts.

Thus, the xTHERM 30p black temperature sensor is designed for long-term, accurate temperature monitoring in residential and industrial areas, which makes it an integral part of modern climate control systems.

Wired room temperature sensor xTHERM 30p White

admin — Tue, 13 Jun 2023 17:07:57 +0000

Room temperature sensor - designed to measure room temperature in an analogue way, changing the internal resistance depending on the temperature.

— installed on the wall in a controlled room.

Installation methods: overhead, wired. Provide for laying the conductors away from the power conductors of electrical appliances. Do not install near windows and doors, do not install near radiators, to avoid the sensor’s response to drafts, convector heat flows and incorrect measurement of room temperature. The installation height is 1.5 meters from the floor, at least 20 centimeters from the corners of the room, avoid installation along the draft between the door and the window.

Used in controllers ecoFLOOR series — analog temperature sensor (for measuring the temperature of a heating/cooling room).ecoMULTI 360 — room temperature sensor.

Temperature range 0/+55*C.

CT10 - coolant temperature sensor

admin — Tue, 13 Jun 2023 16:20:24 +0000

Coolant sensor type ST10 — is designed to measure the temperature of the coolant in an analog way, changing the internal resistance depending on the temperature.

— installed on the boiler supply and return, in the DHW boiler sleeve, used in the system for protecting the pellet burner from overheating of the fuel supply unit, and also used in the storage tank at the top and bottom points of the tank.

— when working with a mixer, a coolant sensor is installed after the mixing unit to monitor the temperature leaving the consumer.

Installation methods: overhead (with the obligatory use of thermal-conducting paste, ensuring tight clamping and good thermal contact. Or submersible, in a sleeve specially provided in the line or container, with the obligatory use of heat-conducting silicone oil or heat-conducting paste to ensure reliable thermal contact. The use of oils that destroy plastic is prohibited.

Used in ecoMAX 850 and 950 series controllers - pellet burner temperature sensor, ecoMAX 260 - coolant and hot water supply temperature sensor, ecoFLOOR - analog temperature sensor (for measuring the temperature of heating/cooling circuits). ecoMULTI 360 - heating circuit temperature sensor.

Temperature range -25/+125*C.

Execution - in a copper sleeve. The diameter of the sleeve is 5mm, the length of the sleeve is 48mm.

Actuator for controlling the underfloor heating circuit TTO230

admin — Tue, 13 Jun 2023 14:18:50 +0000

Actuator for controlling the underfloor heating circuit, 220/230VAC 50/60Hz 2W (300ma)

Fixation on thread. Two-wire connection. Manual/Automatic operating mode switch - allows you to perform the initial setup of the circuit (flow) without dismantling the actuator. Convenient control and adjustment of the circuit in manual mode. Compatible with automation xFLOOR 2 control of underfloor heating systems.

European manufacturer PLUM, stylish design.

Thread M30x1.5

-25*C/+60*C IP 54

Opening time - 4 minutes.

Touch wireless room thermostat xTHERM 60r black

admin — Tue, 13 Jun 2023 13:55:39 +0000

Functions

The room thermostat maintains the set temperature in the room and informs about controller alarms.

Controller settings can be controlled from any room.

One system solution

The xTHERM series thermostats work as part of a single system together with the ecoMULTI installation controller and xFLOOR underfloor heating controller.

Remote control and maintenance

With the BT module, you can remotely control the desired temperature in the premises of the building.

Installation methods

Invoice, in a niche. Provide a recess in the wall for the battery compartment protruding from the back of the thermostat according to the dimensions of the instructions. Do not install near windows and doors, do not install near radiators, to avoid the sensor’s reaction to drafts, heat flows from the convector and incorrect measurement of room temperature. The installation height is 1.5 meters from the floor, at least 20 centimeters from the corners of the room, avoid installation along the draft between the door and the window.

Power supply: two AA batteries

Touch wireless room thermostat xTHERM 60R white

admin — Tue, 13 Jun 2023 13:53:17 +0000

Functions

The room thermostat maintains the set temperature in the room and informs about controller alarms.

Controller settings can be controlled from any room.

One system solution

The xTHERM series thermostats work as part of a single system together with the ecoMULTI installation controller and xFLOOR underfloor heating controller.

Remote control and maintenance

With the BT module, you can remotely control the desired temperature in the premises of the building.

Installation methods

Invoice, in a niche. Provide a recess in the wall for the battery compartment protruding from the back of the thermostat according to the dimensions of the instructions. Do not install near windows and doors, do not install near radiators, to avoid the sensor’s reaction to drafts, convector heat flows and incorrect measurement of room temperature. The installation height is 1.5 meters from the floor, at least 20 centimeters from the corners of the room, avoid installation along the draft between the door and the window.

Power supply: two AA batteries

Wireless room temperature sensor xTHERM 30r black

admin — Tue, 13 Jun 2023 13:50:28 +0000

The room sensor, in a black plastic case, is designed to measure room temperature.

Used in ecoFLOOR series controllers

— digital wireless temperature sensor, measuring room temperature — heating/cooling.

— installed on the wall in a controlled room.

Installation methods - delivery note. Do not install near windows and doors, do not install near radiators, to avoid the sensor’s response to drafts, convector heat flows and incorrect measurement of room temperature. The installation height is 1.5 meters from the floor, at least 20 centimeters from the corners of the room, avoid installation along the draft between the door and the window.

Power supply: 3 volt battery, type CR2032