Automatic solid fuel boiler 2000 kW FOCUS With pellet burner (option)

The new Ukrainian 2000 kW FOCUS solid fuel boiler offers an efficient solution for automatic heat generation without the use of gas. Designed for semi-industrial use, this model is ideal for heating residential buildings, greenhouses, offices, and other facilities. This boiler provides cost-effective heating for buildings, reducing operating costs and maintaining stable, automatic operation.
The new Ukrainian 2000 kW FOCUS solid fuel boiler offers an efficient solution for automatic heat generation without the use of gas. Designed for semi-industrial use, this model is ideal for heating residential buildings, greenhouses, offices, and other facilities. This boiler provides cost-effective heating for buildings, reducing operating costs and maintaining stable, automatic operation.
The model can be used as a pellet boiler when installing an integrated sectional door with an opening for a pellet burner, but is originally intended for industrial heat generation from solid fuel, such as coal or briquettes.
By purchasing a 2000 kW solid fuel boiler, you can switch to pellet fuel at any time with minimal investment. The recommended model is programmable and allows you to maintain the temperature parameters of the heating circuits.

Why is it profitable to use hybrid boilers (solid fuel and pellet)

Today, even when using more expensive wood pellets with an ash content of 1%, heating savings can reach 50%, making pellets an attractive alternative fuel. The 2000 kW FOCUS solid fuel boiler, with the option of integrating a pellet burner, is ideal for burning high-ash pellets, such as sunflower husk pellets (ash content of 5-7%). The equipment provides high efficiency of up to 92% thanks to pyrolysis gas afterburning, which significantly reduces ash deposition.
This boiler can also run on home-made pellets, which minimizes heating costs with full automation and comfort similar to gas heating.
In the basic version, the 2000 kW solid fuel boiler is designed for burning such types of fuel as wood and coal, including DG brand.

Peculiarities solid fuel boiler

The 2000 kW FOCUS solid fuel boiler, when operated with manual fuel loading, has the following key characteristics:

• Air supply by fans controlled by ecoMAX 260 MINI controller (included).
• The controller controls:
  • Indirect heating boiler pump for hot water supply (switches off when the set temperature is reached).
  • Heating circuit of the boiler.
  • Boost fan.
• There are 2 inputs for sensors and 1 input for the boiler protection thermostat.
• Horizontal three-pass heat exchanger with an area of 167 m².
• Door for manual loading of solid fuel and optional door for installation of FOCUS pellet burner (interchangeable, open in different directions).
• The boiler is made of solid elements of 09G2S structural steel.
• Thermally insulated doors resistant to thermal deformation.
• The security group is purchased separately.
• Installation of the boiler in a separate boiler room.
• Possibility of manufacturing lower power boilers for FOCUS pellet burners.

This 2000 kW solid fuel boiler complies with GOST 32452-2013 (EN 15270:2007). A 12-month warranty is provided.

2000 kW solid fuel boiler: additional equipment for pellets

To equip a pellet boiler room, in addition to the installation kit, you will need:

• pellet burner FOCUS 1500 kW;
• pellet hopper for 1.7 cubic meters m.

Consult our specialists on the features of the deployment of heating circuits and connections.

Requirements for the boiler room

When designing, you must adhere to the requirements:

• MDNAOP 0.001.26-96;
• DBN B.2.5-XX: 20XX;
• SNiP 2.04.05-91 "Heating, ventilation and air conditioning";
• SNiP II-35-76 "Boiler plants".

Interesting to read

Pellet burner operation process in detail

Which solid fuel boiler to buy for production

How does the design of the pellet hopper affect efficiency?

Pellet boiler FOCUS 500 (100-550 kW)

The FOCUS 90 kW solid fuel boiler for pellet burner provides an ideal solution for providing heat in automatic mode without dependence on gas. It is specially designed for semi-industrial use, suitable for boiler rooms in residential buildings and offices, providing efficient heating of both small and large facilities. Operation on solid fuel allows for a significant reduction in operating costs, making this boiler cost-effective for users seeking to reduce heating costs.

The FOCUS 90 kW pellet burner boiler is manufactured using advanced technology and high-quality materials, which guarantees its reliable operation and long service life. Thanks to its well-thought-out design and ease of use, control and maintenance do not require much effort, which simplifies its use. In conditions of unstable gas supply, the FOCUS 90 kW solid fuel boiler is an excellent choice, offering efficiency, economy and comfort.

What is the reason for the choice: FOCUS 90 kW solid fuel boiler for a pellet burner

Choosing a solid fuel boiler with a capacity of 90 kW, in particular with a pellet burner, is a rational decision in terms of economic efficiency and ease of use.

Firstly, even when using more expensive low-ash wood pellets (1%), heating costs can be reduced to 50%. Pellets are becoming an attractive alternative, allowing you to effectively heat rooms without significant costs. The FOCUS 90 kW pellet burner boiler allows you to purchase the burner separately and easily install it in the integrated door.

Secondly, granulated fuel from sunflower husk with ash content of 5-7% is actively used in Ukraine. The 90 kW FOCUS solid fuel boiler, compatible with the FOCUS pellet burner, is specially designed to operate with such high-ash granules. Thanks to the pyrolysis afterburning function of gases formed during thermal decomposition of fuel and the supply of air to the combustion zone, the boiler prevents ash from settling on the heat exchanger, which increases the efficiency to 92%. This is higher than most electric boilers.

The FOCUS 90 kW pellet burner boiler can also ultimately operate on home-made pellets, which reduces the cost of heating to a minimum, making it attractive for autonomous households. At the same time, the operating comfort is comparable to gas heating, and the boiler operates fully automatically.

In addition, the basic configuration of the boiler supports the combustion of various types of solid fuel, such as wood and coal, which makes it a universal and flexible solution for various heating needs.

Features of solid fuel boiler 90 kW FOCUS 

Additional equipment for equipping a pellet boiler room

To equip a pellet boiler room, in addition to the installation kit, you will need:

• pellet burner FOCUS;
• 0.6 cubic pellet hopper m;
• quick connection kit with 4-way mixer

Consult with our experts on the features of the deployment of heating circuits and connection.

Dimensions (edit)

Dimensional drawing

Chimney diameter

219mm.

Requirements for the boiler room

When designing a boiler room where a FOCUS 90 kW pellet burner boiler will be installed, it is necessary to adhere to the following requirements:

• MDNAOP 0.001.26-96;
• DBN B.2.5-XX: 20XX;
• SNiP 2.04.05-91 "Heating, ventilation and air conditioning";
• SNiP II-35-76 "Boiler plants".

Interesting to read

Pellet burner operation process in detail

Which solid fuel boiler to buy for production

How does the design of the pellet hopper affect efficiency?

Automatic solid fuel boiler 600 kW FOCUS with pellet burner (optional)

The new Ukrainian solid fuel boiler FOCUS 600 kW has all the necessary functions to provide the consumer with the opportunity to receive heat without gas in automatic mode. This model is intended for semi-industrial use in boiler houses of residential buildings, greenhouses and officesproviding heating of buildings and structures at a low cost.

Pellet heating in a solid fuel boiler is economically advantageous

Today, even when using more expensive wood pellets with an ash content of 1%, the savings on heating with pellets reach 50% from the price of gas. This is a significant savings to consider pellets as an alternative type of fuel and not to save on heat, while heating all the necessary rooms and open areas. A 600 kW solid fuel boiler can solve the problem of heating an apartment building, building or production workshop.

Considering that granulated fuel from sunflower husk with ash content of 5-7% is sold in large volumes in Ukraine, the proposed 600 kW solid fuel boiler with the possibility of integration with the FOCUS pellet burner, which is designed to work with high-ash granules. The equipment provides pyrolysis afterburning of gases from thermal decomposition of solid fuel, with air supply to the combustion zone, reducing ash deposition on the heat exchanger and walls, and efficiency when working with a pellet burner up to 92% along with more expensive in terms of thermal energy - electric boilers.

In addition, the 600 kW solid fuel boiler has a special grate design designed for the use of a pellet burner and increasing the efficiency and useful heat capacity of the equipment.

A 600 kW solid fuel boiler with a pellet burner can operate on pellets made by home-made methods. In this case, the cost of heating autonomous households is reduced to a minimum with a comfort level comparable to gas heating, and with fully automatic operation of the boiler. In the basic version, the boiler is designed to burn solid fuels such as firewood, coal, including DG brand.

Features of solid fuel boiler 600 kW FOCUS 

The proposed 600 kW solid fuel boiler, when operating on manual fuel loading, has a number of advantages that are not always available in similar models from other manufacturers:

• fan controlled air supply ecoMAX 260 MINI controller (included in delivery);
• the controller controls the pump of the indirect heating boiler (switching it off when the set temperature is reached), the heating circuit of the boiler, and the booster fan;
• There are 2 inputs for sensors, 1 input for the boiler protection thermostat;
• horizontal three-pass heat exchanger with increased heat exchange area;
• there is a door for manual loading of solid fuel. The second door is optional, for installation of the FOCUS pellet burner, ordered separately, but is installed on the existing fasteners in the boiler. Moreover, with a mirror arrangement, when the doors for manual loading and the door of the pellet burner open in different directions as needed. The opening sides are interchangeable. More efficient heating is guaranteed with automatic operation;
• the boiler is made of structural steel 09G2S from solid elements assembled according to the modular principle.
• the door is thermally insulated and does not undergo thermal deformation at maximum performance;
• security group is not included in the package (purchased separately).

The 600 kW solid fuel boiler is installed in a separate boiler room. If necessary, the manufacturer produces boilers with a lower capacity for FOCUS pellet burners.

Boiler complies with GOST32452-2013 (EN 15270:2007). A 12 month warranty is provided.

Additional equipment for equipping a pellet boiler room

To equip a pellet boiler room, in addition to the installation kit, you will need:

• pellet burner FOCUS 500 kW;
• pellet hopper

Consult our specialists on the specifics of deploying heating circuits and connecting heating devices.

Requirements for the boiler room

When designing, you must adhere to the requirements:

• MDNAOP 0.001.26-96;
• DBN B.2.5-XX: 20XX;
• SNiP 2.04.05-91 "Heating, ventilation and air conditioning";
• SNiP II-35-76 "Boiler plants".

Interesting to read

Pellet burner operation process in detail

Which solid fuel boiler to buy for production

How does the design of the pellet hopper affect efficiency?

Controller

Automatic solid fuel boiler 800 kW FOCUS With pellet burner (option)

Automatic solid fuel boiler 800 kW FOCUS with the possibility of installing a pellet burner (optional) is a modern solution for obtaining heat without using gas, designed for semi-industrial use. The boiler is designed for heating residential buildings, detached buildings, including those remote from the city, office buildings, greenhouses and farms, providing reliable and economical heat supply when heating with pellets. One of the main advantages of this model is the ability to work in automatic mode, which greatly simplifies operation and makes it convenient for users.

Automatic solid fuel boiler 800 kW: how profitable is it to use

The use of pellet heating in this solid fuel boiler allows saving up to 50% in heating costs compared to traditional energy sources. Even when using expensive wood pellets with an ash content of 1%, fuel costs remain significantly lower. Moreover, the FOCUS 800 kW boiler is ideal for operation with granulated fuel from sunflower husks with an ash content of 5-7%, which makes it universal and adaptable to various types of biomass.

The boiler efficiency when using a pellet burner reaches 92%, which is an excellent indicator for boilers of this type. This is ensured by pyrolysis afterburning of gases arising from thermal decomposition of fuel, and an air supply system that minimizes ash deposition and increases the efficiency of the equipment.

The automatic solid fuel boiler 800 kW FOCUS is also capable of operating on pellets made by handicraft methods, which makes it even more economical for autonomous households. In the basic configuration, the boiler is designed to burn such types of fuel as wood and coal, which expands its possibilities of use.

Features of the boiler include fan-controlled air supply with ecoMAX 260 MINI controller, which regulates the operation of the heating circuit, indirect heating boiler pump and blower fan. The boiler is equipped with a horizontal three-way heat exchanger with an area of 65.8 m², doors for manual fuel loading and the ability to install a pellet burner. The structure is made of durable 09G2S steel, which guarantees the reliability and durability of the equipment.

Among the unique additions in the field of heating equipment, the boiler supports pyrolysis afterburning of fuel from thermal decomposition, fully controlled air supply to the combustion chamber, which also reduces soot deposition on the heat exchanger and combustion chamber walls. The optional torch-type pellet burner has an efficiency of 92%.

Why choose the automatic solid fuel boiler 800 kW FOCUS

FOCUS 800 kW is the optimal solution for boiler houses, providing high heating efficiency with minimal fuel costs and comfortable control in automatic mode.

The automatic solid fuel boiler 800 kW FOCUS can operate on handicraft pellet granules. For these purposes, foliage, wood waste, chopped straw, various agricultural waste and peat can be used. Even with an increase in the ash content of the fuel, the proposed equipment will cope with the heating task, and the costs for the granule can be minimal for you.

In the basic version, the boiler is designed to burn solid fuels such as wood, coal, including DG brand.

Features of solid fuel boiler 800 kW FOCUS 

The proposed automatic solid fuel boiler FOCUS 800 kW when operating on manual fuel loading has a number of distinctive qualities and advantages that have no analogues from other manufacturers:

• controlled air supply to the furnace, controlled ecoMAX 260 MINI controller (included in delivery);
• the built-in microcontroller is connected to the indirect hot water heating boiler pump (switching it off when the set temperature is reached), the boiler heating circuit, the booster fan, together providing the temperature;
• There are 2 inputs for sensors, 1 input for the boiler protection thermostat;
• three-pass horizontal heat exchanger with a maximum area of 65.8 m²;
• the kit includes a door for manual loading of solid fuel. The second door is supplied optionally, it has an opening for installing a FOCUS pellet burner. It is installed on the existing fasteners in the boiler, in a mirrored arrangement. When installing an integrated door, the door for manual loading and the door of the pellet burner open in different directions as needed. The sides of the door opening are interchangeable, can be reconfigured depending on convenience and installation of the boiler;
• Automatic boiler operation mode provides more efficient heating. Solid fuel boiler 800 kW FOCUS is a modern program-controlled equipment with two types of fuel loading;
• the boiler is made of structural steel 09g2s from solid elements, with a minimum set of connections, assembled according to the modular principle;
• The 800 kW FOCUS solid fuel boiler has a heat-insulated door that is not subject to thermal deformation under maximum operating conditions;
• To operate the boiler and install the boiler circuit, a safety group is required (purchased separately).

According to the manufacturer's recommendations, the automatic solid fuel boiler 800 kW FOCUS is installed in a separate room, in the boiler room. If necessary, the manufacturer makes boilers with a lower capacity for FOCUS pellet burners, also offered in a wide range of power ranges.

Boiler complies with GOST32452-2013 (EN 15270:2007). A 12 month warranty is provided.

Additional equipment for equipping a pellet boiler room

To equip a pellet boiler room, in addition to installation kit you will need:

• pellet burner FOCUS 700 kW;
• pellet hopper;

Consult our specialists on the features of the deployment of heating circuits and connections.

Requirements for the boiler room

When designing, you must adhere to the requirements:

• MDNAOP 0.001.26-96;
• DBN B.2.5-XX: 20XX;
• SNiP 2.04.05-91 "Heating, ventilation and air conditioning";
• SNiP II-35-76 "Boiler plants".

Interesting to read

Pellet burner operation process in detail

Which solid fuel boiler to buy for production

How does the design of the pellet hopper affect efficiency?

Controller

The new Ukrainian solid fuel boiler 50 kW FOCUS has all the necessary advantages to provide heat without dependence on gas in automatic mode. This model is designed for semi-industrial use in boiler houses of residential buildings and offices, which allows for efficient heating of both small and larger buildings. Working in automatic mode, the boiler provides stable and comfortable heating, which is especially important in conditions of unstable gas supply.

The use of solid fuel significantly reduces operating costs, making this solution cost-effective for users seeking to reduce heating costs. The 50 kW FOCUS solid fuel boiler is manufactured using modern technologies and high-quality materials, which guarantees reliable operation and durability of the equipment.

In addition, it is designed with ease of use in mind, including ease of control and maintenance. This allows you to minimize the time and effort spent on its use. Thus, the solid fuel boiler 50 kW FOCUS is the optimal solution for obtaining heat without gas, combining efficiency, economy and comfort.

What is the reason for choosing a pellet boiler: 50 kW solid fuel boiler for a pellet burner

The choice of a pellet boiler, in particular a 50 kW solid fuel boiler for a pellet burner, is determined by many factors that affect economic efficiency and ease of use.

Firstly, even when using more expensive low ash wood pellets (1%), significant savings on heating can be achieved, up to 50%. This makes pellets an attractive alternative for providing heat, allowing you to heat the necessary rooms and outdoor areas without damaging your budget.

Secondly, granulated fuel produced from sunflower husks with an ash content of 5-7% is actively sold in Ukraine. The 50 kW FOCUS solid fuel boiler, compatible with the FOCUS pellet burner, is designed to operate with high-ash granules. This equipment provides pyrolysis afterburning of gases resulting from the thermal decomposition of solid fuel. Air supply to the combustion zone helps reduce ash deposition on the heat exchanger and boiler walls, which leads to an increase in efficiency up to 92%, which is significantly higher than that of more expensive electric boilers.

In addition, this boiler can effectively operate on pellets produced by handicraft methods, which reduces the cost of heating for autonomous households to a minimum. At the same time, the level of comfort is comparable to gas heating, and the boiler room operates in a fully automatic mode, which significantly simplifies operation.

In its basic configuration, the boiler is designed to burn various types of solid fuel, such as wood and coal (including DG brands), which makes it a universal heating solution.

Features of solid fuel boiler 50 kW FOCUS 

Solid fuel boiler 50 kW FOCUS complies with GOST32452-2013 (EN 15270:2007). A 12 month warranty is provided.

Additional equipment for equipping a pellet boiler room

To equip a pellet boiler room, in addition to the installation kit, you will need:

• pellet burner FOCUS;
• 0.6 cubic pellet hopper m;
• quick connection kit with 4-way mixer

Consult with our experts on the features of the deployment of heating circuits and connection.

Dimensions (edit)

Dimensional drawing

Chimney diameter

159mm.

Requirements for the boiler room

When designing a boiler room where it will be installed Solid fuel boiler 50 kW FOCUS, it is necessary to adhere to the following requirements:

• MDNAOP 0.001.26-96;
• DBN B.2.5-XX: 20XX;
• SNiP 2.04.05-91 "Heating, ventilation and air conditioning";
• SNiP II-35-76 "Boiler plants".

Interesting to read

Pellet burner operation process in detail

Which solid fuel boiler to buy for production

How does the design of the pellet hopper affect efficiency?

Automatic solid fuel boiler 1500 kW FOCUS With pellet burner (option)

The new Ukrainian solid fuel boiler 1500 kW FOCUS offers an effective solution for automatic heat generation without using gas. The model is designed for semi-industrial use and is ideal for heating residential buildings, greenhouses, offices and other facilities. The boiler provides economical heating of buildings, reducing operating costs and maintaining stable operation in automatic mode.
The new Ukrainian solid fuel boiler 1500 kW FOCUS offers an effective solution for automatic heat generation without using gas. The model is designed for semi-industrial use and is ideal for heating residential buildings, greenhouses, offices and other facilities. The boiler provides economical heating of buildings, reducing operating costs and maintaining stable operation in automatic mode.
The model can be used as a pellet boiler when installing an integrated sectional door with an opening for a pellet burner, but is originally intended for industrial heat generation from solid fuel, such as coal or briquettes.
When purchasing a 1500 kW solid fuel boiler, you can switch to pellet fuel at any time with minimal investment. The recommended model is program-controlled and allows you to maintain the temperature parameters of the heating circuits.

Why is it profitable to use hybrid boilers (solid fuel and pellet)

Today, even when using more expensive wood pellets with an ash content of 1%, heating savings can reach 50%, which makes pellets an attractive alternative fuel. The 1500 kW FOCUS solid fuel boiler, with the ability to integrate a pellet burner, is ideal for working with high-ash pellets, such as sunflower husk pellets (ash content 5-7%). The equipment provides high efficiency up to 92% due to pyrolysis gas afterburning, which significantly reduces ash deposition.
This boiler can also run on home-made pellets, which minimizes heating costs with full automation and comfort similar to gas heating.
In the basic version, the 1500 kW solid fuel boiler is designed to burn such types of fuel as wood and coal, including DG brand.

Peculiarities solid fuel boiler

The solid fuel boiler 1500 kW FOCUS, when operating on manual fuel loading, has the following key characteristics:

• Air supply by fans controlled by ecoMAX 260 MINI controller (included).
• The controller controls:
  • Indirect heating boiler pump for hot water supply (switches off when the set temperature is reached).
  • Heating circuit of the boiler.
  • Boost fan.
• There are 2 inputs for sensors and 1 input for the boiler protection thermostat.
• Horizontal three-pass heat exchanger with an area of 83 m².
• Door for manual loading of solid fuel and optional door for installation of FOCUS pellet burner (interchangeable, open in different directions).
• The boiler is made of solid elements of 09G2S structural steel.
• Thermally insulated doors resistant to thermal deformation.
• The security group is purchased separately.
• Installation of the boiler in a separate boiler room.
• Possibility of manufacturing lower power boilers for FOCUS pellet burners.

Solid fuel boiler 1500 kW complies with GOST32452-2013 (EN 15270:2007). A 12-month warranty is provided.

Solid fuel boiler 1500 kW: additional equipment for pellets

To equip a pellet boiler room, in addition to the installation kit, you will need:

• pellet burner FOCUS 1500 kW;
• pellet hopper for 1.7 cubic meters m.

Consult our specialists on the features of the deployment of heating circuits and connections.

Dimensions (edit)

4100*2100*3050

Chimney diameter

610 mm

Requirements for the boiler room

When designing, you must adhere to the requirements:

• MDNAOP 0.001.26-96;
• DBN B.2.5-XX: 20XX;
• SNiP 2.04.05-91 "Heating, ventilation and air conditioning";
• SNiP II-35-76 "Boiler plants".

Interesting to read

Pellet burner operation process in detail

Which solid fuel boiler to buy for production

How does the design of the pellet hopper affect efficiency?

Pellet boiler FOCUS 500 (100-550 kW)

To equip a pellet boiler room, in addition to the installation kit, you will need:

• pellet burner FOCUS 17 kW;
• pellet burner FOCUS 25 kW;
• 0.6 cubic pellet hopper m;
• quick connection kit with 4-way mixer

Consult with our experts on the features of the deployment of heating circuits and connection.

Dimensions (edit)

Dimensional drawing

Chimney diameter

160mm.

Requirements for the boiler room

When designing, you must adhere to the requirements:

• MDNAOP 0.001.26-96;
• DBN B.2.5-XX: 20XX;
• SNiP 2.04.05-91 "Heating, ventilation and air conditioning";
• SNiP II-35-76 "Boiler plants".

Interesting to read

Pellet burner operation process in detail

Which solid fuel boiler to buy for production

How does the design of the pellet hopper affect efficiency?

Automatic solid fuel boiler 1000 kW FOCUS With pellet burner (supplied as an option)

The new Ukrainian solid fuel boiler FOCUS 1000 kW has all the necessary advantages to receive heat without gas in automatic mode. This model is intended for semi-industrial use in boiler houses of residential buildings, greenhouses and officesproviding heating of buildings and structures at a low cost.

Economic justification for pellet heating in a solid fuel boiler

Today, even with the use of more expensive wood pellets with an ash content of 1%, heating savings reach 50%. This is a significant difference in order to consider pellets as an alternative type of fuel and not save on heat by heating all the necessary rooms and open areas.

Considering that granulated fuel from sunflower husks with an ash content of 5-7% is sold in large volumes in Ukraine, the proposed FOCUS 1000 kW solid fuel boiler with the ability to integrate a FOCUS pellet burner is designed to work with high-ash granules. The equipment provides pyrolysis afterburning of gases from the thermal decomposition of solid fuel, with air supply to the combustion zone, reducing ash deposition on the heat exchanger and walls, and efficiency when working with a pellet burner up to 92%, along with more expensive thermal energy - electric boilers.

In addition, the FOCUS 1000 kW solid fuel boiler has a special grate design designed for the use of a pellet burner and increasing the efficiency of the equipment.

A 1000 kW solid fuel boiler with a pellet burner can operate on homemade pellets. In this case, the cost of heating autonomous households is reduced to a minimum with a level of comfort comparable to gas heating and fully automatic operation of the boiler room. In the basic version, the boiler is designed for burning solid fuels such as wood, coal, including DG grade.

Peculiarities solid fuel boiler 1000 kW FOCUS 

The proposed solid fuel boiler FOCUS 1000 kW, when operating with manual fuel loading, has a number of distinctive qualities and advantages that have no analogues from other manufacturers:

• fan controlled air supply ecoMAX 260 MINI controller (included in delivery);
• the controller controls the pump of the indirect DHW heating boiler (switching it off when the set temperature is reached), the boiler heating circuit, and the blower fan.
• there are 2 inputs for sensors, 1 input for the boiler protection thermostat.
• horizontal three-pass heat exchanger with an area of 83 m2;
• there is a door for manual loading of solid fuel. The second door is optional, for installing the FOCUS pellet burner - ordered separately but installed on existing fixtures in the boiler, in the form of a mirror arrangement, when the manual loading doors and the pellet burner door open in different directions as needed. The opening sides are interchangeable. With automatic operation, more efficient heating is guaranteed;
• the boiler is made of structural steel 09g2s from solid elements assembled according to a modular principle;
• the door is thermally insulated and does not undergo thermal deformation at maximum performance;
• security group is not included in the package (purchased separately).

The FOCUS 1000 kW solid fuel boiler is installed in a separate boiler room. If necessary, the manufacturer produces boilers of lower power for FOCUS pellet burners.

Boiler complies with GOST32452-2013 (EN 15270:2007). A 12 month warranty is provided.

Additional equipment for equipping a pellet boiler room

To equip a pellet boiler room, in addition to the installation kit, you will need:

• pellet burner FOCUS 1000 kW;
• pellet hopper for 1.7 cubic meters m.

Consult our specialists on the features of the deployment of heating circuits and connections.

Dimensions (edit)

3100*1850*2900

Chimney diameter

510 mm

Requirements for the boiler room

When designing, you must adhere to the requirements:

• MDNAOP 0.001.26-96;
• DBN B.2.5-XX: 20XX;
• SNiP 2.04.05-91 "Heating, ventilation and air conditioning";
• SNiP II-35-76 "Boiler plants".

Interesting to read

Pellet burner operation process in detail

Which solid fuel boiler to buy for production

How does the design of the pellet hopper affect efficiency?

Pellet boiler FOCUS 500 (100-550 kW)

Automatic solid fuel boiler 700 kW FOCUS With pellet burner (supplied as an option)

The new Ukrainian solid fuel boiler FOCUS 700 kW has all the necessary advantages to get heat without gas in automatic mode. This model is intended for semi-industrial use in boiler houses of residential buildings, greenhouses and officesproviding heating of buildings and structures at a low cost.

Economic justification for pellet heating in a solid fuel boiler

Today, even with the use of more expensive wood pellets with an ash content of 1%, heating savings reach 50%. This is a significant difference in order to consider pellets as an alternative type of fuel and not save on heat by heating all the necessary rooms and open areas.

Considering that granulated fuel from sunflower husks with an ash content of 5-7% is sold in Ukraine in large volumes, the proposed solid fuel boiler FOCUS 700 kW with the possibility of integrating a FOCUS pellet burner designed to work with high-ash granules. The equipment provides pyrolysis afterburning of gases from the thermal decomposition of solid fuels, with air supply to the combustion zone, reducing ash deposition on the heat exchanger and walls, and efficiency when working with a pellet burner up to 92% along with more expensive thermal energy - electric boilers.

In addition, the solid fuel boiler FOCUS 700 kW has a special grate design, designed for the use of a pellet burner and increasing the efficiency of the equipment.

A 700 kW solid fuel boiler with a pellet burner can operate on home-made pellets. In this case, the cost of heating autonomous households is reduced to a minimum with a comfort level comparable to gas heating and fully automatic operation of the boiler house. In the basic version, the boiler is designed for burning solid fuels such as firewood, coal, including DG grades.

Features of the solid fuel boiler 700 kW FOCUS 

The proposed solid fuel boiler FOCUS 700 kW, when operating on manual fuel filling, has a number of distinctive qualities and advantages that have no analogues from other manufacturers:

• fan controlled air supply ecoMAX 260 MINI controller (included in delivery);
• the controller controls the pump of the indirect DHW heating boiler (switching it off when the set temperature is reached), the boiler heating circuit, and the blower fan.
• there are 2 inputs for sensors, 1 input for the boiler protection thermostat.
• horizontal downstream heat exchanger with an area of 57 m2;
• there is a door for manual loading of solid fuel. The second door is optional, for installing the FOCUS pellet burner - ordered separately but installed on existing fixtures in the boiler, in the form of a mirror arrangement, when the manual loading doors and the pellet burner door open in different directions as needed. The opening sides are interchangeable. With automatic operation, more efficient heating is guaranteed;
• the boiler is made of structural steel 09g2s from solid elements assembled according to a modular principle;
• the door is thermally insulated and does not undergo thermal deformation at maximum performance;
• security group is not included in the package (purchased separately).

Solid fuel boiler FOCUS 700 kW is installed in a separate boiler room. If necessary, the manufacturer manufactures boilers with a smaller capacity for FOCUS pellet burners.

Boiler complies with GOST32452-2013 (EN 15270:2007). A 12 month warranty is provided.

Additional equipment for equipping a pellet boiler room

To equip a pellet boiler room, in addition to the installation kit, you will need:

• pellet burner FOCUS 700 kW;
• pellet hopper

Consult our specialists on the features of the deployment of heating circuits and connections.

Requirements for the boiler room

When designing, you must adhere to the requirements:

• MDNAOP 0.001.26-96;
• DBN B.2.5-XX: 20XX;
• SNiP 2.04.05-91 "Heating, ventilation and air conditioning";
• SNiP II-35-76 "Boiler plants".

Interesting to read

Pellet burner operation process in detail

Which solid fuel boiler to buy for production

How does the design of the pellet hopper affect efficiency?

Controller

Automatic solid fuel boiler 500 kW FOCUS With pellet burner (supplied as an option)

The new Ukrainian solid fuel boiler FOCUS 500 kW has all the necessary advantages to receive heat without gas in automatic mode. This model is intended for semi-industrial use in boiler houses of residential buildings, greenhouses and officesproviding heating of buildings and structures at a low cost.

Economic justification for pellet heating in a solid fuel boiler

Today, even with the use of more expensive wood pellets with an ash content of 1%, heating savings reach 50%. This is a significant difference in order to consider pellets as an alternative type of fuel and not save on heat by heating all the necessary rooms and open areas.

Considering that granulated fuel from sunflower husks with an ash content of 5-7% is sold in large volumes in Ukraine, the proposed FOCUS 500 kW solid fuel boiler with the ability to integrate a FOCUS pellet burner is designed to work with high-ash granules. The equipment provides pyrolysis afterburning of gases from the thermal decomposition of solid fuel, with air supply to the combustion zone, reducing ash deposition on the heat exchanger and walls, and efficiency when working with a pellet burner up to 92%, along with more expensive thermal energy - electric boilers.

In addition, the FOCUS 500 kW solid fuel boiler has a special grate structure designed to use a pellet burner and increase the efficiency of the equipment.

A 500 kW solid fuel boiler with a pellet burner can operate on homemade pellets. In this case, the cost of heating autonomous households is reduced to a minimum with a level of comfort comparable to gas heating and fully automatic operation of the boiler room. In the basic version, the boiler is designed for burning solid fuels such as wood, coal, including DG grade.

Features of solid fuel boiler 500 kW FOCUS 

The proposed solid fuel boiler FOCUS 500 kW, when operating with manual fuel loading, has a number of distinctive qualities and advantages that have no analogues from other manufacturers:

• fan controlled air supply ecoMAX 260 MINI controller (included in delivery);
• the controller controls the pump of the indirect DHW heating boiler (switching it off when the set temperature is reached), the boiler heating circuit, and the blower fan.
• there are 2 inputs for sensors, 1 input for the boiler protection thermostat.
• horizontal three-pass heat exchanger with an area of 45 m2;
• there is a door for manual loading of solid fuel. The second door is optional, for installing the FOCUS pellet burner - ordered separately but installed on existing fixtures in the boiler, in the form of a mirror arrangement, when the manual loading doors and the pellet burner door open in different directions as needed. The opening sides are interchangeable. With automatic operation, more efficient heating is guaranteed;
• the boiler is made of structural steel 09g2s from solid elements assembled according to a modular principle;
• the door is thermally insulated and does not undergo thermal deformation at maximum performance;
• security group is not included in the package (purchased separately).

The FOCUS 500 kW solid fuel boiler is installed in a separate boiler room. If necessary, the manufacturer produces boilers of lower power for FOCUS pellet burners.

Boiler complies with GOST32452-2013 (EN 15270:2007). A 12 month warranty is provided.

Additional equipment for equipping a pellet boiler room

To equip a pellet boiler room, in addition to the installation kit, you will need:

• pellet burner FOCUS 500 kW;
• pellet hopper

Consult our specialists on the features of the deployment of heating circuits and connections.

Requirements for the boiler room

When designing, you must adhere to the requirements:

• MDNAOP 0.001.26-96;
• DBN B.2.5-XX: 20XX;
• SNiP 2.04.05-91 "Heating, ventilation and air conditioning";
• SNiP II-35-76 "Boiler plants".

Interesting to read

Pellet burner operation process in detail

Which solid fuel boiler to buy for production

How does the design of the pellet hopper affect efficiency?

Controller