XSMART System:

Wired room thermostat eSTER_x40 is a convenient and functional modern module that reflects the concept of a “smart home”.

Equipment that enhances comfort

The EcoNet Internet Module is purchased with the selected controller for service pellet burners... Recommended for installation:

• additional temperature sensors;
• room sensor EcoSter (thermostat).

This digital equipment kit complements wired room thermostat eSTER_x40 increases the convenience of boiler control, the level of comfort in the heated room and helps to further reduce heating costs due to precise adjustment of heating modes depending on the time of day and day of the week.

Internet service

EcoNet Internet system with a mobile application that performs management and maintenance functions. It supports and manages the online operation of devices FOCUS EcoNet in the WiFi network standard.

The EcoNet Internet system is an Internet module with a mobile application for remote control of FOCUS devices via WiFi, with an intuitive interface and SCADA visualization. It supports the main communication protocols and ensures a high level of data transfer security.

Main functions of EcoNet:

• Remote control of heating equipment.
• Visualization of archived data and performance indicators (graphs, alerts).
• Control of temperature parameters, pump and mixer.
• Service access for system settings and notifications.

The EcoNet Internet system is included with the controller and is recommended for installation with additional temperature sensors and the EcoSter thermostat.

EcoNet Internet service

The EcoNet Internet system allows you to monitor and control the operation of PLUM devices via the website www.econet24.com, monitoring heating, ventilation and heat pump parameters. The system records and displays alarms and data history, with the ability to send notifications.

Mobile app

EcoNet.apk and EcoNet.app provide viewing and changing of operating parameters of the equipment via a smartphone or tablet, which allows flexible management of schedules and operating modes of the heating and ventilation system.

Technical passport

Controller for central heating systems ecoMAX360 I — is a universal climate control module for integrated control of heating, cooling and ventilation systems. Main features and functionality:

1. Heat source control: ensures switching on and off of pellet, gas, fuel oil boilers and heat pumps, automatically switching to cooling mode when necessary.
2. Touch screen: The ecoMAX360 central heating controller provides a user-friendly interface with intuitive touch screen controls, making it easy to set up and control all systems.
3. Hot water supply (HWS) control:
   • Control of the DHW pump and circulation pump for heating the boiler and supplying hot water to consumers.
4. Heating circuits:
   • Three circuits: one for switching the pump on/off, two adjustable for automatically maintaining set temperatures using weather control and mixer servo drives.
   • Possibility of joint or separate control of heating for different floors or rooms.
5. Expanding the contours:
   • Additional modules B and C allow you to add 2 adjustable circuits each (4 in total), automatically integrated into the controller menu for centralized control.
6. Weather Algorithm:
   • Automatic switch to summer or winter mode to turn heating functions on/off, with the ability to continue heating DHW in the summer or off-season.
   • Customizable weather response schedule for each circuit.
7. Working hours:
   • Setting up daily and weekly schedules to optimize temperature depending on the time of day and working/weekend day.
8. Internet module for remote control:
   • The ecoMAX360 central heating controller provides the ability to remotely configure, monitor and diagnose the system, including collecting and analyzing statistics.
9. Thermostat support:
   • Connect both wired and wireless thermostat panels to control temperatures in individual rooms.
10. Automatic switch to cooling:
    • When the heat pump supports the cooling function, it automatically switches from heating to cooling based on the outside temperature sensor.
11. DHW boiler disinfection function:
    • Periodically heats the boiler to eliminate bacteria (eg legionella), ensuring safe use of water.
12. Contour operating modes:
    • Support for operation both at a constant temperature and according to a weather algorithm, which allows for the optimization of energy costs.

The ecoMAX360 I central heating controller provides a convenient and reliable way to control the climate, ideal for facilities with high demands on climate control automation.

Typical installation diagram of the ecoMULTI 360 controller

Structure of the ecoMULTI 360 system

Contents of delivery:

• outdoor weather sensor ST6-R - 1 pc.;
• heating system sensor ST-10 2 m - 3 pcs.;
• room thermostat panel with communication cable - 1 pc.;
• ecoMulti 360 controller unit - 1 pc.;
• power cable 220 volts euro 1m - 1 pc.;
• box, instructions - kit.

Optional system modules:

Room thermostat touch wired xTHERM 60p black

Room thermostat touch wired xTHERM 60p white

Internet-based device management system FOCUS EcoNet 360

CT10 - coolant temperature sensor

Extension module type B

Extension module type C

Interesting to read

Smart home: economical heating of a private house and affordable benefits

Heating on demand. Temperature sensors and other ways to save heat

Heating automation - what are the modern and affordable options?

Utility DHW automation: new and classic possibilities

How not to be left without warmth. What modern reliable heating systems look like

The xTHERM 30p black room temperature sensor is designed for high-precision measurement of indoor air temperature and is characterized by resistance to interference, reliability and a long service life. It uses an analog measurement method, changing the internal resistance depending on the temperature, which allows for stable and accurate readings in real time.

Room temperature sensor xTHERM 30p black: main characteristics:

• Principle of operation:
  • The sensor's operation is based on an analog measurement method, where a change in temperature causes a change in the sensor's internal resistance. This allows the sensor to quickly and accurately respond to any temperature fluctuations in the room.
• Installation methods:
  • Surface mounting: the xTHERM 30p black temperature sensor (wired) is mounted on the wall in the monitored room, making it easy to install and maintain.
  • Wired connection: the xTHERM 30p black temperature sensor is connected to the control system via wires, which minimizes the likelihood of failures and interference.
• Placement Recommendations:
  • Installation height: the recommended installation height is 1.5 meters from the floor level, which corresponds to the average height of the room space and avoids temperature gradients.
  • Distance from corners and doors: should be installed at least 20 cm from corners to avoid distortion of readings due to heat flows.
  • Avoid direct exposure to heat sources: It is not recommended to install the xTHERM 30p black temperature sensor near radiators, convectors and in places with strong drafts, such as areas between a window and a door. This is important for correct temperature display without distortions caused by external factors.
• Operating temperature range:
  • The xTHERM 30p black temperature sensor operates in a temperature range from 0 to +55 °C, which allows it to be used in conditions typical for residential and office premises.
• Electrical interference immunity:
  • During installation, it is recommended to lay the sensor conductors away from power cables to eliminate the influence of electromagnetic interference on the accuracy of readings. This is especially important for installation in areas with a high concentration of electrical equipment.

Compatibility and application:

• Compatibility with controllers:
  • Temperature sensor xTHERM 30p black can be used with controllers of the series ecoFLOOR and ecoMULTI 360, which support analog sensors for monitoring and controlling room temperatures, as well as for regulating temperatures in heating and cooling systems.
• Application areas:
  • The xTHERM 30p black room temperature sensor is ideal for use in climate control systems, smart home systems, office premises, and industrial facilities where high temperature control accuracy is required.
  • Recommended for installation in rooms with sensitive microclimate, such as greenhouses, hothouses, production facilities with the required temperature conditions.
• Advantages:
  • Accuracy and reliability: the sensor guarantees high accuracy of readings, minimizing errors by eliminating the influence of external factors.
  • Easy to install and maintain: Surface-mounted installation method and wired connection make it easy to install the sensor indoors.
  • Safety and durability: the device is made of high-quality materials, which ensures a long service life and resistance to mechanical impacts.

Thus, the xTHERM 30p black temperature sensor is designed for long-term, accurate temperature monitoring in residential and industrial areas, which makes it an integral part of modern climate control systems.

— installed on the wall in a controlled room.

Installation methods: overhead, wired. Provide for laying the conductors away from the power conductors of electrical appliances. Do not install near windows and doors, do not install near radiators, to avoid the sensor’s response to drafts, convector heat flows and incorrect measurement of room temperature. The installation height is 1.5 meters from the floor, at least 20 centimeters from the corners of the room, avoid installation along the draft between the door and the window.

Used in controllers ecoFLOOR series — analog temperature sensor (for measuring the temperature of a heating/cooling room).ecoMULTI 360 — room temperature sensor.

Temperature range 0/+55*C.

— installed on the boiler supply and return, in the DHW boiler sleeve, used in the system for protecting the pellet burner from overheating of the fuel supply unit, and also used in the storage tank at the top and bottom points of the tank.

— when working with a mixer, a coolant sensor is installed after the mixing unit to monitor the temperature leaving the consumer.

Installation methods: overhead (with the obligatory use of thermal-conducting paste, ensuring tight clamping and good thermal contact. Or submersible, in a sleeve specially provided in the line or container, with the obligatory use of heat-conducting silicone oil or heat-conducting paste to ensure reliable thermal contact. The use of oils that destroy plastic is prohibited.

Used in ecoMAX 850 and 950 series controllers - pellet burner temperature sensor, ecoMAX 260 - coolant and hot water supply temperature sensor, ecoFLOOR - analog temperature sensor (for measuring the temperature of heating/cooling circuits). ecoMULTI 360 - heating circuit temperature sensor.

Temperature range -25/+125*C.

Execution - in a copper sleeve. The diameter of the sleeve is 5mm, the length of the sleeve is 48mm.

Fixation on thread. Two-wire connection. Manual/Automatic operating mode switch - allows you to perform the initial setup of the circuit (flow) without dismantling the actuator. Convenient control and adjustment of the circuit in manual mode. Compatible with automation xFLOOR 2 control of underfloor heating systems.

European manufacturer PLUM, stylish design.

Thread M30x1.5

-25*C/+60*C IP 54

Opening time - 4 minutes.